Dash & cameras
Second ODROID H5 on Linux driving a 10.1" gauge screen and three cameras
A second onboard computer drives the gauge screen and the camera views, with hardwired warning lamps as a backup.
A custom dash
The original plan was a Haltech dash. It's been dropped. Instead, a second ODROID H5 drives a 10.1" Xenarc screen directly and draws both the gauges and the camera views.
This computer runs Linux, not Windows, because it boots faster: the reverse camera can't wait for Windows. It listens to both the engine and body buses through a two-channel adapter, and like every onboard computer it never transmits.
Cameras
Turn signal on: that side plus the rear camera. Reverse: the rear camera. Road speed is drawn into the picture.
Backup lamps
Hardwired warning lamps for oil pressure, coolant temperature, check engine and charging are driven straight by the engine computer and power module. If the dash computer is ever down, the warnings that matter still show.
Parts list
What it takes, and where each part stands. Prices are left off; part numbers aren't.
Computer
- Dash computerODROID H5, LinuxChosen
Display
- Dash screenXenarc 1029GNH, 10.1" 16:10Chosen
Cameras
- CamerasRear, left and rightTo decide
Data
- CAN adapterTwo-channel PEAK USB adapter, listen-onlyChosen
Backup
- Warning lampsOil pressure, coolant, check engine, charging, hardwiredChosen
Photos
Photos go up here as the work happens.
Progress
A custom dash instead of an off-the-shelf one
The planned Haltech dash is dropped. The second ODROID H5 runs Linux for fast boot (the reverse camera can't wait), drives a 10.1" screen directly, and draws both the gauges and the camera views. It listens to the engine and body buses. Hardwired lamps for oil pressure, coolant, check engine and charging stay as a backup.
When the cameras show
Turn signal on: that side plus the rear camera. Reverse: the rear camera. Road speed is drawn into the picture.